Home  Profile
  Products Contact Us
  Feedback

JAW CRUSHER

Jaw Crusher

THE GENERAL CONSTRUCTION DETAIL
Main Frame (Body) :

"YAGNAM" Crushers bodies are fabricated from high class quality ultrasonically tested steel plates (IS 2062). Ribs are provided along the line of stress to give maximum strength and minimize vibration.
Eccentric Shaft : An EN series Carbon Steel shaft is used, which is finished to a high degree of accuracy to give
an exact stroke to the swing jaw. The raw material is ultrasonically tested & then hardened to ensure a long life.
Roller Bearing : Heavy duty self-aligning spherical double roller are fitted to give smooth and economical running of the machine. The bearing used withstand very heavy loads and fluctuations on the line of action of the shaft.
Jaw Stock : The Jaw stock (levers) is made of high quality cast steel castings (IS 1030) with deep webbing to give it great strength. The bearings seat (bore) of the jaw stock is given very high finish using carbide tools.
Housings : Cast Steel housings are provided to support the eccentric shaft and are fitted with heavy duty self aligning spherical roller bearings.
Toggle Mechanism : C.I. Toggle Plates are used which act as a "fuse", in case of overloads. They are seated on tempered toggle bearings.
Jaw Plates : Jaw Plates are made of high grade Chrome-Manganese steel and they can be reversed end to end, to give maximum life to each jaw plate.
Side Wearing Plate : They are also made of high grade Chrome-Manganese Steel which saves the body from wearing.
Fly Wheel : Well balanced large diameter flywheels (Flat and "V") are provided, which can be interchanged from side to side. Counter weights are added to balance the eccentricity of the Shaft.
Lubrication : Grease nipples are provided at the right places for long life of the bearing.
.........................................................................................................................................................................................................................
SPECIFICATIONS :
CRUSHER RANGE
Size (Inches) Motor Rating (H.P.) Feed Size Max (Inches) Average output in Brass (per 8 hrs.) Speed (rpm)
8 x 5 5/7.5 4 1/2 300
12 x 7 12.5/15 6 6/12 300
14 x 7 15/20 6 8/14 300
16 x 10 25/30 9 14/30 315
20 x 10 35/40 9 24/55 325
24 x 12 40/50 11 50/85 315
         
PRIMARY CRUSHERS
24 x 18 40/50 16 80/140 300
32 x 16 50/60 14 100/160 300
32 x 20 60/75 18 130/210 285
36 x 24 100/125 22 170/300 275
42 x 32 150/175 30 300/500 275
         
SECONDARY CRUSHERS (Granulators)
16 x 6 25/30 5 10/30 325
24 x 6 30/40 5 30/50 325
32 x 7 40/50 6 50/70 325
42 x 8 50/60 7 60/100 32
         
NEW ADDITION
32 x 10 50 9 50 / 90 32
32 x 12 50 11 60 / 100 31
48 x 36 175 / 200 34 400 / 600 275
         
.........................................................................................................................................................................................................................
AVERAGE CRUSHING CAPACITY IN TONS PER HOUR
Size (Inches) Jaw Settings at Opening shown (in mm)
12 19 25 32 40 50 75 100 125
8 x 5 1 2 - - - - - - -
12 x 7 2 3 4 5 - - - - -
14 x 7 3 4 6 7 - - - - -
16 x 10 6 8 10 12 15 18 - - -
20 x 10 12 15 18 20 22 26 34 - -
24 x 12 - - 26 28 30 34 40 - -
24 x 18 - - - - 40 48 60 70 -
32 x 16 - - - - 48 56 68 80 -
32 x 20 - - - - - 65 80 95 115
36 x 24 - - - - - - 95 120 140
42 x 32 - - - - - - - 160 210
                   
SECONDARY CRUSHER GRANULATORS
32 x 7 23 28 33 38 45 - - - -
42 x 8 30 36 42 48 55 - - - -
                   
NEW ADDITION
32 x 10 - 24 26 29 33 38 45 - -
32 x 12 - - 28 31 36 41 48 - -
48 x 36 - - - - - - - - 260

Reuest For Quote


JAW CRUSHER | PRECRUSHER | HAMMER MILL | MASALA MILL | MULTI MILL | PIN PULVERIZER | RIBBON BLENDER | DOUBLE CONE BLENDER  | OCTAGONAL BLENDER | VIBRATORY SIEVING MACHINE | ROTARY SIEVING MACHINE  | SCREW FEEDERS | APRON FEEDERS | TABLE FEEDERS | BUCKET ELEVATOR | PNEUMATIC CONVEYORS |
DEEP BUCKET CONVEYORS | PIVOTED BUCKET CONVEYORS | RACK & PINION GATES | AIR LOCK ALVE | Turnkey Project For Mixed Spices Grinding Plant |
Turnkey Project For Spices Grinding Plant | Turnkey Project For Bulk Drugs Grindling Plant |
Turnkey Project For Ayurvedic Herbs & Roots Grinding Plant | Turnkey Project For Coconut Shell Grinding Plant |
Aluminum sulphate grinding plant  | Saw dust drying grinding plant. |
  CONTACT US : * Tel. : 022 - 2764 0995 / 2769 8824 / 31 / 32 * Fax : 91-22 - 2760 4205
 

Designed & Hosted by : MID   Promoted by : GID